Precision Forged Flanges & Fittings - Built for Global Markets

Quality Certifications

Internationally recognized certifications that verify our quality management system, product standards, and manufacturing capabilities.

ISO

ISO 9001:2015

Quality Management System

Certificate Holder: ZHEJIANG JIAJI FORGING INDUSTRY CO., LTD.

Certificate No.: 00523Q4039R0S

Issuing Body: China Classification Society Certification Co., Ltd. (CCSC)

Accreditation: CNAS C005-M, IAF Multilateral Recognition Arrangement

Standard: GB/T 19001-2016 / ISO 9001:2015

Scope: Manufacture of steel forged flanges, forged pipe fittings and metallic ring joint gaskets for use with steel pipe flanges

What this means for you: Our quality management system is certified by CCSC, the certification arm of the China Classification Society and a CNAS-accredited, IAF-recognised body. The scope covers forged flanges, forged fittings and ring joint gaskets under one system.

PED
AD

PED 2014/68/EU

EU Pressure Equipment Directive

Certificate No.: DGR-0036-QS-W 1169/2023/MUC-02

Issuing Body: TÜV SÜD Industrie Service GmbH, Notified Body 0036

Legal Basis: PED 2014/68/EU Annex I, Section 4.3; AD 2000-Merkblatt W 0; EN 764-5, Para. 4.2

Scope: Material manufacturer for flanges in austenitic steels, austenitic-ferritic (duplex) steels and nickel alloys

Reference: N-C31478-25

Scope note: Carbon steel and low-alloy steel grades are not covered by this certificate; they are supplied under our ISO 9001 system with EN 10204 3.1 / 3.2 documentation.

What this means for you: As a certified material manufacturer we issue 3.1 certificates in our own name for austenitic, duplex and nickel alloy flanges placed on the EU market. Annual surveillance audits by Notified Body 0036 keep the approval in force.

M-650

NORSOK M-650 (Ed. 4)

Qualification Test Record — QTR

Document Type: Qualification Test Record issued under NORSOK M-650, Edition 4

QTR No.: 15-BJ-FA2026-963195-001, Rev. 0

Issuing Body: TÜV SÜD Certification and Testing (China) Co., Ltd., Beijing Branch

MDS: R14 — F44 to ASTM A182; 1.4547 to EN 10222-5

Qualified Size Range: Closed-die flanges up to 200 mm section / 200 kg; open-die flanges up to 300 mm section

What this means for you: Qualification under NORSOK M-650 is granted per material data sheet (MDS) after witnessed testing of production forgings — it is not a plant-wide certificate. The QTR above covers MDS R14 (F44 / 1.4547) within the size range stated. Ask us for the current QTR if your project specifies a different MDS.

Our Quality Assurance System

Beyond certifications, our quality assurance covers every aspect of the manufacturing and delivery process.

[Doc]

Full Material Traceability

Every raw material heat/lot is recorded with its mill test certificate (MTC). Traceability is maintained from the steel mill through forging, heat treatment, machining, and final inspection. Each product is marked with heat number, material grade, and pressure rating.

[Inspect]

Dual Inspection System

Every batch of products undergoes two rounds of inspection before shipment: (1) In-process inspection during machining, and (2) Final inspection before packaging. Inspection reports cover dimensions, surface finish, marking, and pressure tests.

[Chart]

Inspection & Test Process

Our QC process follows a strict multi-stage protocol:

Q1

Incoming Material Inspection

PMI testing, chemistry verification, dimension check, visual inspection

Q2

Heat Treatment Verification

Temperature records, hardness testing, microstructure check

Q3

Process Inspection

CNC dimension verification, surface finish inspection, marking check

Q4

Final Pre-Shipment Inspection

100% visual + dimensional check, UT on critical items, pressure test

Process Engineering & In-House R&D

Process know-how is developed in-house rather than licensed. Our engineering team works on flange connection geometry, forging process windows and quality control methods, and those methods are written into the company's own manufacturing specifications.

In-House Development Areas

Flange connection technology

Forging process improvements

Quality testing methods

Product design innovations

R&D Investment

JIAJI FORGING allocates not less than 5% of annual revenue to research and development, ensuring continuous improvement in product quality and manufacturing efficiency.

Engineering Team

Our in-house engineering team works closely with customers on custom forging solutions, from technical review of drawings to prototype development and production.

Verify Our Credentials

Contact our Shanghai team to request copies of our current certificates (validity dates included), factory audit reports, or to arrange a video call factory tour.

Contact Us Factory & Workshop