Norma europea integral plate flange welded directly to pipe. EN 1092-1 Type 01. DN15-DN1000, PN2.5-PN40. Simple construction for general process piping.
The EN 1092-1 Type 01 Plate Flange is a flat, integral flange with no hub (or a very short hub) that is fillet-welded directly to the pipe. It is the simplest and most economical flange type in the EN 1092-1 series. The weld is placed on both the inner and outer surfaces of the flange, providing a reliable seal for low-to-medium pressure applications.
JIAJI FORGING fabrica Type 01 Plate flanges in austenitic stainless steel, duplex & super duplex (EN 1.4462, 1.4410), and nickel alloys para el mercado global.
Type A
Cara Plana
Type B
Cara Realzada
Type C
Tongue & Groove
| Parameter | Specification |
|---|---|
| Estándar | EN 1092-1 Type 01 |
| Rango de Tamaños | DN 15 - DN 1000 |
| Pressure Rating | PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40 |
| Face Finish | Type A (Flat), Type B (Raised), Type C (T&G) |
| Materiales | X5CrNi18-10 (1.4301), X2CrNi18-9 (1.4306), X5CrNiMo17-12-2 (1.4401), X2CrNiMo17-12-2 (1.4404), X2CrNiMoN22-5-3 (1.4462), X2CrNiMoN25-7-4 (1.4410), NiCr22Mo9Nb (2.4856), NiCu30Fe (2.4360) |
| Surface | Anti-rust oil, black, galvanized, painted |
PDF dimension tables by PN class:
| EN Designation | No. |
|---|---|
| X5CrNi18-10 | 1.4301 |
| X2CrNi18-9 | 1.4306 |
| X5CrNiMo17-12-2 | 1.4401 |
| X2CrNiMo17-12-2 | 1.4404 |
| X6CrNiTi18-10 | 1.4541 |
| X6CrNiNb18-10 | 1.4550 |
| EN Designation | No. |
|---|---|
| X2CrNiMoN22-5-3 | 1.4462 |
| X2CrNiMoN25-7-4 | 1.4410 |
| X2CrNiMoCuWN25-7-4 | 1.4501 |
| EN / Alloy Name | No. |
|---|---|
| NiCr22Mo9Nb | 2.4856 |
| NiCr21Mo | 2.4858 |
| NiMo16Cr15W | 2.4819 |
| NiCu30Fe | 2.4360 |
Per EN 1092-1, each flange is permanently marked with: Fabricante / Estándar / Type / Size / Pressure Rating / Material / Heat No.
Example: JIAJI · EN 1092-1-01 · DN100 · PN16 · 316L · HEAT-2024-001
Optional: CE marking (PED 2014/68/EU), 3.1/3.2 inspection certificates, NACE MR0175 available upon request.
EN 1092-1 Type 11. High-pressure. DN15-DN1000. PN2.5-PN400.
Ver Detalles →EN 1092-1 Type 21. Integral loose plate for lap joint assembly. DN10-DN300. PN6-PN40.
Ver Detalles →EN 1092-1 Type 05. Full bore closure. DN10-DN2000. PN2.5-PN400.
Ver Detalles →Profundice sus conocimientos con nuestras guías técnicas detalladas escritas por ingenieros de JIAJI:
Normas de bridas y accesorios ASME B16.5, EN 1092-1, DIN, GB explicadas con tablas comparativas.
Leer Guía →Tipos de cara de brida, clases de presión, cálculo de torque de pernos y mejores prácticas de selección de juntas.
Leer Guía →Guía de selección de acero al carbono, acero inoxidable, dúplex, superdúplex y aleaciones de níquel.
Leer Guía →Secuencia correcta de instalación de bridas, apriete de pernos, almacenamiento de juntas e inspección periódica.
Leer Guía →