Bridas y Accesorios Forjados de Precisión — Fabricados para Mercados Globales

EN 1092-1 Integral Loose Plate Flange - Type 21

Norma europea integral loose plate flange with machined collar. EN 1092-1 Type 21. DN10-DN300, PN6-PN40. For lap joint assembly with Type 32 collar.

Integral Loose Plate Flange Type 21

The EN 1092-1 Type 21 Integral Loose Plate Flange (also referred to as Integral Loose Plate Flange with collar) is a non-welding flange plate designed for use in a Lap Joint Assembly. The key distinguishing feature is its integral collar — a collar that is machined as one piece with the plate body — which serves as the centering and supporting surface against the pipe.

Unlike a standard slip-on flange (Type 12), the Type 21 plate is not welded to the pipe. Instead, the collar (Type 32) is butt-welded to the pipe end, and the Type 21 plate slides over the collar and is held captive against it. This design allows the flange plate to rotate freely, making alignment and maintenance significantly easier.

JIAJI FORGING fabrica Type 21 Integral Loose Plate flanges in austenitic stainless steel, duplex & super duplex (EN 1.4462, 1.4410), and nickel alloys.

Lap Joint Assembly — How It Works

Step 1: The Type 32 Loose Collar is butt-welded to the pipe end.

Step 2: The Type 21 Integral Loose Plate slides over the collar.

Step 3: Bolts pass through the flange bolt holes; the collar OD centers the plate.

Result: The plate can rotate 360° without disturbing the pipe weld — ideal for confined spaces or frequent maintenance.

Aplicaciones

  • Petroquímica and refining process lines
  • Oil and gas gathering lines
  • Seawater cooling systems (easy bolt removal)
  • Chemical processing with frequent maintenance
  • Food and beverage hygienic piping
  • Confined-space installations where alignment is difficult

Clases de Presión

PN 6 / PN 10 / PN 16 / PN 25 / PN 40

Facing Types

Type A
Cara Plana

Type B
Cara Realzada

Type C
Tongue & Groove

Type D
Junta de Anillo

EN 1092-1 Type 21 Integral Loose Plate Flange DN100 PN16

Especificaciones

ParameterSpecification
EstándarEN 1092-1 Type 21
Connection TypeLoose plate, integral collar, no weld to pipe
Assembly PartnerType 32 Loose Collar (butt-welded to pipe)
Rango de TamañosDN 10 - DN 300
Pressure RatingPN 6, PN 10, PN 16, PN 25, PN 40
Face FinishType A/B/C/D
MaterialesX5CrNi18-10 (1.4301), X2CrNiMo17-12-2 (1.4404), X2CrNiMoN22-5-3 (1.4462), X2CrNiMoN25-7-4 (1.4410), NiCr22Mo9Nb (2.4856), NiCu30Fe (2.4360)
SurfaceAnti-rust oil, black, galvanized

Type 21 vs Type 02 — Key Differences

FeatureType 21 — Integral Loose PlateType 02 — Loose Plate (Plain)
CollarIntegral collar machined as one piece with platePlain bore — no collar
CenteringCollar OD centers plate on pipeNo centering — uses separate collar component
Max PressurePN 40PN 40
Max SizeDN 300DN 600
EstándarEN 1092-1 Type 21EN 1092-1 Type 02

Lap Joint Assembly — Type 21 + Type 32

Type 21 — Integral Loose Plate

Plate with machined integral collar. Slides over pipe. No welding required on the plate itself.

Key benefit: 360° rotation for easy alignment

Type 32 — Loose Collar (Plate Collar)

A separate collar ring butt-welded to the pipe end. The collar OD matches the Type 21 bore for precise centering.

Key benefit: Only the collar is welded — no heat-affected zone on the flange plate

Assembly Sequence

1. Weld Type 32 collar to pipe end

2. Slide Type 21 plate over collar

3. Insert bolts; tighten against companion flange

Materiales Disponibles

Acero Inoxidable Austenítico

EN DesignationNo.
X5CrNi18-101.4301
X2CrNi18-91.4306
X2CrNiMo17-12-21.4404
X6CrNiTi18-101.4541

Dúplex y Superdúplex

EN DesignationNo.
X2CrNiMoN22-5-31.4462
X2CrNiMoN25-7-41.4410

Aleaciones de Níquel

EN / Alloy NameNo.
NiCr22Mo9Nb2.4856
NiCr21Mo2.4858
NiCu30Fe2.4360

Marcado y Control de Calidad

Per EN 1092-1, each flange is permanently marked with: Fabricante / Estándar / Type / Size / Pressure Rating / Material / Heat No.

Example: JIAJI · EN 1092-1-21 · DN100 · PN16 · 316L · HEAT-2024-001

Optional: CE marking (PED 2014/68/EU), 3.1/3.2 inspection certificates, NACE MR0175.

Productos Relacionados

Loose Collar (Type 32)

EN 1092-1 Type 32. Plate collar butt-welded to pipe. For lap joint assembly with Type 21. DN10-DN300.

Ver Detalles →

Loose Plate Flange (Type 02)

EN 1092-1 Type 02. Plain bore loose plate. DN10-DN600. PN2.5-PN40.

Ver Detalles →

Blind Flange (Type 05)

EN 1092-1 Type 05. Full closure. DN10-DN2000. PN2.5-PN400.

Ver Detalles →

Recursos Técnicos Relacionados

Profundice sus conocimientos con nuestras guías técnicas detalladas escritas por ingenieros de JIAJI:

Normas y Cumplimiento

Normas de bridas y accesorios ASME B16.5, EN 1092-1, DIN, GB explicadas con tablas comparativas.

Leer Guía →

Diseño e Ingeniería

Tipos de cara de brida, clases de presión, cálculo de torque de pernos y mejores prácticas de selección de juntas.

Leer Guía →

Selección de Materiales

Guía de selección de acero al carbono, acero inoxidable, dúplex, superdúplex y aleaciones de níquel.

Leer Guía →

Pressure Vessel Flanges

ASME BPVC Section VIII requirements, LWN flanges, custom vessel flanges & face protection.

Leer Guía →
Solicitar Cotización ->Back to EN / DIN Flanges