Norma europea loose flange collar (stub end). EN 1092-1 Type 32 (DIN 2672). DN10-DN500, PN2.5-PN40. Used with Type 02 loose plate for rotatable flange assembly.
The EN 1092-1 Type 32 Loose Flange Collar (DIN 2672) is a short stub end with a welding neck that is butt-welded to the pipe. It is used in combination with a Type 02 loose plate flange or Type 04 loose blind flange. The collar allows the loose plate to rotate freely for easy bolt alignment during assembly.
JIAJI FORGING fabrica Type 32 Welding Neck Collars in austenitic stainless steel, duplex & super duplex (EN 1.4462, 1.4410), and nickel alloys.
PN 2.5 / PN 6 / PN 10 / PN 16 / PN 25 / PN 40
Type A
Cara Plana
Type B
Cara Realzada
| Parameter | Specification |
|---|---|
| Estándar | EN 1092-1 Type 32 |
| Equivalent DIN | DIN 2672 |
| Rango de Tamaños | DN 10 - DN 500 |
| Pressure Rating | PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40 |
| Face Finish | Type A (Flat), Type B (Raised) |
| Materiales | X5CrNi18-10 (1.4301), X2CrNiMo17-12-2 (1.4404), X2CrNiMoN22-5-3 (1.4462), X2CrNiMoN25-7-4 (1.4410), NiCr22Mo9Nb (2.4856), NiCu30Fe (2.4360) |
| Surface | Anti-rust oil, black, galvanized |
| EN Designation | No. |
|---|---|
| X5CrNi18-10 | 1.4301 |
| X2CrNi18-9 | 1.4306 |
| X2CrNiMo17-12-2 | 1.4404 |
| X6CrNiTi18-10 | 1.4541 |
| EN Designation | No. |
|---|---|
| X2CrNiMoN22-5-3 | 1.4462 |
| X2CrNiMoN25-7-4 | 1.4410 |
| EN / Alloy Name | No. |
|---|---|
| NiCr22Mo9Nb | 2.4856 |
| NiCr21Mo | 2.4858 |
| NiCu30Fe | 2.4360 |
Per EN 1092-1, each collar is permanently marked with: Fabricante / Estándar / Type / Size / Pressure Rating / Material / Heat No.
Example: JIAJI · EN 1092-1-32 · DN100 · PN16 · 316L · HEAT-2024-001
Optional: CE marking (PED 2014/68/EU), 3.1/3.2 inspection certificates, NACE MR0175.
EN 1092-1 Type 02. Loose plate for stub end. DN10-DN600. PN2.5-PN40.
Ver Detalles →EN 1092-1 Type 04. Loose plate with integral weld-neck collar. DN10-DN300. PN2.5-PN40.
Ver Detalles →Profundice sus conocimientos con nuestras guías técnicas detalladas escritas por ingenieros de JIAJI:
Normas de bridas y accesorios ASME B16.5, EN 1092-1, DIN, GB explicadas con tablas comparativas.
Leer Guía →Tipos de cara de brida, clases de presión, cálculo de torque de pernos y mejores prácticas de selección de juntas.
Leer Guía →Guía de selección de acero al carbono, acero inoxidable, dúplex, superdúplex y aleaciones de níquel.
Leer Guía →Secuencia correcta de instalación de bridas, apriete de pernos, almacenamiento de juntas e inspección periódica.
Leer Guía →