Bridas y Accesorios Forjados de Precisión — Fabricados para Mercados Globales

EN 1092-1 Type 04 - Loose Plate Flange with Weld-Neck Collar

EN 1092-1 Type 04 loose plate flange assembly with integral weld-neck collar. DN10-DN300, PN2.5-PN40. Ideal for high-pressure lap joint applications requiring frequent assembly/disassembly.

Type 04 Loose Plate Flange with Weld-Neck Collar

The EN 1092-1 Type 04 Loose Plate Flange Assembly consists of two components: a Loose Plate (flange ring) and a Weld-Neck Collar (integral hub collar). The weld-neck collar is butt-welded to the pipe end, providing a smooth bore transition and excellent stress distribution. The loose plate is free to rotate around the collar, enabling rapid assembly and disassembly without moving the adjacent pipe or equipment.

Compared with Type 02 (Loose Plate with plain collar), the weld-neck collar of Type 04 offers superior reinforcement at the weld joint and improved alignment with the pipe bore — convirtiéndola en la opción preferida para higher pressure and more demanding service conditions.

Key Características

  • Free-rotating loose plate enables rapid maintenance access
  • Weld-neck collar provides smooth bore transition and high mechanical strength
  • Suitable for PN2.5 to PN40 pressure ratings
  • DN10 to DN300 size range
  • Disponible in all major corrosion-resistant alloys
  • Face finish: Cara Plana (Type A), Cara Realzada (Type B), or Tongue & Groove (Type C)

Typical Aplicaciones

  • Chemical and petrochemical processing plants
  • Oil & gas refineries and terminals
  • High-pressure water and steam systems
  • Food & beverage sanitary piping (frequent CIP/SIP access)
  • Pump and valve maintenance connections

How Type 04 Differs from Type 02

Feature Type 02 Type 04
Collar type Plain collar (plate collar / lapped pipe end) Weld-neck collar (hubbed)
Pressure range PN2.5 – PN40 PN2.5 – PN40
Size range DN10 – DN500 DN10 – DN300
Weld reinforcement Estándar fillet weld Full butt-weld with tapered hub
Bore alignment Acceptable Precise alignment via integral hub
EN 1092-1 Annex A group Group 2 (thin-walled) Group 1 (standard)
EN 1092-1 Type 04 Loose Plate Flange with Weld-Neck Collar

Product Especificaciones

Parameter Specification
EstándarEN 1092-1: 2018, Type 04
Equivalent DINDIN 2672 (weld-neck collar)
Rango de TamañosDN 10 – DN 300
Pressure RatingPN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40
Face FinishType A (Cara Plana), Type B (Cara Realzada), Type C (T&G)
MaterialesX5CrNi18-10 (1.4301), X2CrNiMo17-12-2 (1.4404), X2CrNiMoN22-5-3 (1.4462), X2CrNiMoN25-7-4 (1.4410), NiCr22Mo9Nb (2.4856), NiCu30Fe (2.4360)
Surface FinishPickled & passivated, anti-rust oil, or matte polished
Face Finish (RF)Ra 3.2 – 12.5 μm per EN 1092-1

Dimension Reference (DN100 PN16)

Dimension Value (mm)
Bore (B)108.0
Outside Diameter (D)220.0
Hub Diameter at Back (H)114.3
Collar Outside Diameter (Dm)133.0
Thickness of Plate (t)20.0
Thickness of Collar (s)6.3
Length of Collar (L)42.0
Bolt Circle (k)180.0
Bolt Hole Diameter18.0
Number of Bolts8
Bolt SizeM16

Note: Dimensions per EN 1092-1. All dimensions in mm unless stated. For full DN/PN range, refer to EN 1092-1 tables or request our dimensional PDF.

Materiales Disponibles

Acero Inoxidable Austenítico

EN Designation Mat. No. UNS
X5CrNi18-101.4301304
X2CrNi18-91.4306304L
X5CrNiMo17-12-21.4401316
X2CrNiMo17-12-21.4404316L
X6CrNiTi18-101.4541321
X6CrNiNb18-101.4550347

Dúplex y Superdúplex

EN Designation Mat. No. UNS
X2CrNiMoN22-5-31.4462S32205
X2CrNiMoN25-7-41.4410S32750
X2CrNiMoCuWN25-7-41.4501S32760

Super Austenitic

EN Designation Mat. No.
X1NiCrMoCu25-20-51.4539
X1CrNiSi25-211.4361

Aleaciones de Níquel

EN / Alloy Name Mat. No. UNS
NiCr22Mo9Nb2.4856N06625
NiCr21Mo2.4858N06625L
NiCu30Fe2.4360N04400
NiMo16Cr15W2.4819N10276
NiCr15Fe7TiAl2.4669N07718

Marcado y Control de Calidad Assurance

Per EN 1092-1, each Type 04 loose plate and weld-neck collar is permanently marked with: Fabricante / Estándar / Type / Size / Pressure Rating / Material designation / Heat Number.

Example (Loose Plate): JIAJI · EN 1092-1-04 · DN100 · PN16 · 316L · HEAT-2024-001

Example (Weld-Neck Collar): JIAJI · EN 1092-1-04-COLLAR · DN100 · PN16 · 316L · HEAT-2024-001

Optional certifications: CE marking (PED 2014/68/EU), EN 10204 3.1/3.2 inspection certificates, NACE MR0175 / ISO 15156, IBR. Full material traceability and test reports available.

Frequently Asked Questions

Both Type 02 and Type 04 are loose plate flanges used in lap joint assemblies. The key difference is the collar type: Type 02 uses a plain plate collar or lapped pipe end, while Type 04 uses a weld-neck collar (integral hub). The weld-neck collar provides a tapered hub that transitions smoothly from the pipe bore, offering better mechanical strength at the weld joint and more precise bore alignment. Type 04 is typically preferred for higher-pressure or more demanding applications.

Type 04 loose plate flanges with weld-neck collars are available in PN2.5, PN6, PN10, PN16, PN25, and PN40 per EN 1092-1. The size range is DN10 to DN300.

No. Type 04 uses a dedicated weld-neck collar with a specific bore geometry and flange thickness designed for Type 04 loose plates. Mixing collar and plate types is not recommended as it can compromise sealing integrity and pressure containment.

JIAJI FORGING fabrica Type 04 loose plates and weld-neck collars in austenitic stainless steel (304/304L, 316/316L, 321, 347), duplex and super duplex stainless steel (2205/2507/1.4501), super austenitic (904L), and nickel alloys (Inconel 625/600, Hastelloy C276, Monel 400). Custom alloys available on request.

Productos Relacionados

Type 02 - Loose Plate Flange

Loose plate with plain collar. DN10-DN500. PN2.5-PN40. Cost-effective lap joint solution.

Ver Detalles →

Type 05 - Blind Flange

Full bore closure. DN10-DN2000. PN2.5-PN400. No flow connection.

Ver Detalles →

Type 11 - Weld Neck Flange

Integral weld neck. DN10-DN2000. PN2.5-PN400. Full structural reinforcement.

Ver Detalles →

Recursos Técnicos Relacionados

Profundice sus conocimientos con nuestras guías técnicas detalladas escritas por ingenieros de JIAJI:

Normas y Cumplimiento

Normas de bridas y accesorios ASME B16.5, EN 1092-1, DIN, GB explicadas con tablas comparativas.

Leer Guía →

Diseño e Ingeniería

Tipos de cara de brida, clases de presión, cálculo de torque de pernos y mejores prácticas de selección de juntas.

Leer Guía →

Selección de Materiales

Guía de selección de acero al carbono, acero inoxidable, dúplex, superdúplex y aleaciones de níquel.

Leer Guía →

Instalación y Mantenimiento

Secuencia correcta de instalación de bridas, apriete de pernos, almacenamiento de juntas e inspección periódica.

Leer Guía →
Solicitar Cotización → Back to EN / DIN Flanges