Bridas y Accesorios Forjados de Precisión — Fabricados para Mercados Globales

EN 1092-1 Hubbed Slip On Flange - Type 12

Norma europea hubbed slip on flange. EN 1092-1 Type 12 (equivalent DIN 2558). DN10-DN1000, PN6-PN100. Fillet weld connection.

Hubbed Slip On Flange Type 12

The EN 1092-1 Type 12 Hubbed Slip On Flange (DIN 2558) presenta un short, tapered hub with a plain bore. The pipe slips into the flange bore and is secured by fillet welds on both the inside and outside of the hub — producing a strong, leak-tight connection suitable for medium-pressure service.

Type 12 differs from Type 02 (Loose Plate Flange) by having an integral hub that provides additional reinforcement at the pipe junction. Compared to Type 11 (Weld Neck), it requires less weld preparation but offers lower pressure ratings.

JIAJI FORGING fabrica Type 12 Hubbed Slip On flanges in austenitic stainless steel, duplex & super duplex (EN 1.4462, 1.4410), and nickel alloys.

Aplicaciones

  • Medium-pressure process piping
  • Chemical and petrochemical lines
  • Water and wastewater treatment
  • Food and beverage processing
  • Oil and gas transmission lines
  • Power generation auxiliary systems

Clases de Presión

PN 6 / PN 10 / PN 16 / PN 25 / PN 40 / PN 63 / PN 100

Facing Types

Type A
Cara Plana

Type B
Cara Realzada

Type C
Tongue & Groove

Type D
Junta de Anillo

Type E
Female Face

Type F
Male Face

EN 1092-1 Type 12 Hubbed Slip On Flange DN100 PN16

Especificaciones

ParameterSpecification
EstándarEN 1092-1 Type 12
Equivalent DINDIN 2558
Connection TypeHubbed slip-on, double fillet weld
Rango de TamañosDN 10 - DN 1000
Pressure RatingPN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100
Face FinishType A/B/C/D/E/F
MaterialesX5CrNi18-10 (1.4301), X2CrNiMo17-12-2 (1.4404), X2CrNiMoN22-5-3 (1.4462), X2CrNiMoN25-7-4 (1.4410), NiCr22Mo9Nb (2.4856), NiCr21Mo (2.4858), NiCu30Fe (2.4360)
SurfaceAnti-rust oil, black, galvanized

Type 12 vs Type 02 — Key Differences

FeatureType 12 — Hubbed Slip-OnType 02 — Loose Plate
HubIntegral tapered hubPlain bore, no hub
ConnectionFillet weld (ID + OD)Stub end + lap weld
Max PressurePN 100PN 40
Max SizeDN 1000DN 600
ApplicationGeneral process pipingWith stub end, easy alignment

Materiales Disponibles

Acero Inoxidable Austenítico

EN DesignationNo.
X5CrNi18-101.4301
X2CrNi18-91.4306
X5CrNiMo17-12-21.4401
X2CrNiMo17-12-21.4404
X6CrNiTi18-101.4541

Dúplex y Superdúplex

EN DesignationNo.
X2CrNiMoN22-5-31.4462
X2CrNiMoN25-7-41.4410
X2CrNiMoCuWN25-7-41.4501

Aleaciones de Níquel

EN / Alloy NameNo.
NiCr22Mo9Nb2.4856
NiCr21Mo2.4858
NiCu30Fe2.4360

Marcado y Control de Calidad

Per EN 1092-1, each flange is permanently marked with: Fabricante / Estándar / Type / Size / Pressure Rating / Material / Heat No.

Example: JIAJI · EN 1092-1-12 · DN50 · PN16 · 316L · HEAT-2024-001

Optional: CE marking (PED 2014/68/EU), 3.1/3.2 inspection certificates, NACE MR0175.

Productos Relacionados

Weld Neck Flange (Type 11)

EN 1092-1 Type 11. High-pressure. DN15-DN1000. PN2.5-PN400.

Ver Detalles →

Loose Plate Flange (Type 02)

EN 1092-1 Type 02. Loose plate with plain bore. DN10-DN600. PN2.5-PN40.

Ver Detalles →

Threaded Flange (Type 13)

EN 1092-1 Type 13. Internal Rp/Rc thread. DN10-DN150. PN2.5-PN400. No welding required.

Ver Detalles →

Recursos Técnicos Relacionados

Profundice sus conocimientos con nuestras guías técnicas detalladas escritas por ingenieros de JIAJI:

Normas y Cumplimiento

Normas de bridas y accesorios ASME B16.5, EN 1092-1, DIN, GB explicadas con tablas comparativas.

Leer Guía →

Diseño e Ingeniería

Tipos de cara de brida, clases de presión, cálculo de torque de pernos y mejores prácticas de selección de juntas.

Leer Guía →

Selección de Materiales

Guía de selección de acero al carbono, acero inoxidable, dúplex, superdúplex y aleaciones de níquel.

Leer Guía →

Instalación y Mantenimiento

Secuencia correcta de instalación de bridas, apriete de pernos, almacenamiento de juntas e inspección periódica.

Leer Guía →
Solicitar Cotización ->Back to EN / DIN Flanges